htc AT-528 hair trimmer from daraz review & unboxing

 

htc AT-528 hair trimmer from daraz review & unboxing

I have bought a AT-528 hTC rechargeable hair trimmer from Bangladesh online marketplace Daraz; this is my review & unboxing video regarding this product. I am satisfied because it is reasonable and its quality is excellent. Also, daraz packed it so heavily and delivered it on time.

The features of HTC AT-528

1/ Durable and sharp blade
2/ A new concept design
3/ T precision blade with cutting well and soft touch
4/ push type swich and easy to operation
5/ 8 hours charge for 45 min cordless use

Maintainance of battery

Recharge the battery regularly as per the usage time. Recharge the battery once in every month if the trimmer is not in use for longer period. This battery with the trimmer can be recharged for 300 times, after that you need to change the battery of the trimmer.

Cleaning and Maintanance

While cleaning the appliance make sure that the device is in OFF mode. To clean the blades use the cleaning brush and remove the stricking hairs from the blade. To remove the bladed head from the trimmer, just pull it from the front end. Then clean the inside of the trimmer if any hair is there. Use the lubricating oil to libricate the motor one in a month or two as per the frequency of use of the trimmer.

Preparing for use

The trimmer should be charged for at least 16 hours before the first use. Before charging please check that the battery is placed inside the trimmer in the right position. To charge the trimmer, insert the 2 hole point end of the charging wire into the charging point of the trimmer and then insert the other end of the charging wire with the two pin plug into an electricity supplying socket. Before you switch on charging point, make sure that the trimmer is in OFF mode. Do not switch on the trimmer while in charging mode. After the trimmer is fully recharged for at least 16 hours, it is ready to use. Remove the charging wire from the trimmer now. The trimmer can be used with or without the clip on comb attachment. If you are using the trimmer with the clip on comb, adjust the trimming size as per your requirement. To adjust the trimming size you need to slide it up and down along the blade. The clip on comb should be adjusted while the trimmer is in OFF mode only. The clipping comb allows to cut 4 different sizes from 3mm to 6mm. After using the trimmer, switch it OFF.